Style Is Everything

Posts tagged “240SX

Quote

NASA Drift Wild Horse Motorsports Park (WHOMP) East Track

I think I’m getting a little too artsy because of the crappy zoom on the kit lens. I need to get back to basics but that means a $400 lens, shit.

IMG_2707resized

IMG_2719resized

IMG_2722resized

IMG_2728resized

IMG_2732resized

IMG_2739resized

IMG_2746resized

IMG_2756resized

IMG_2779resized

IMG_2785resized


Quote

ASB13

ASB13001
ASB13002
ASB13003
ASB13004
ASB13005
ASB13006
ASB13007
ASB13008
ASB13009
ASB13009
ASB13010
ASB13011
ASB13012

I might get around to putting together the video footage I got but I’m not enthusiastic being I used a Rebel T2i and a kit lens with no media access.


Quote

Recap and Crash

So, crashing sucks. I’m sitting in my office thinking about the tasks ahead and how to proceed.

recapandcrash001

I really was hoping to get a bunch more events in before this happened but I knew it would. Part of all the experiments I’ve been doing involve having low amounts of front grip. Why, I’m not really sure. I feel like I’ve been able to manage low power and low grip very well but it got me into a bunch of trouble this time.

recapandcrash002

With the lack of power I wasn’t able to keep up with my friends I was tandeming with. An unexpected spin meant that I was just far enough behind that they had just enough time to come to a complete stop as I was initiating into the turn. Add in that low front grip I was talking about and you have a nasty lock up into t-bone with frame rail 50/50 smash.

recapandcrash003

Anyway, it happens. At least I got a few good pics from friends before it happened and I finally took video. Youtube is free so that’s where the video is haha!

Of course after the crash my water heater at the shop would decide to spring a leak while I’m at work.

recapandcrash004

And the last few pics of her ever looking like this again. Photo credits go to Beau Bridges for Minus Darkslide and Jeffrey Buchanan at Golden Automotive Photography both of whom are on FaceBook!

recapandcrash005
recapandcrash006
recapandcrash007
recapandcrash008recapandcrash009
recapandcrash010


Quote

Pavilions Car Meet July 6th 2013

IMG_1669resized

IMG_1670resized

IMG_1671resized

IMG_1675resized

IMG_1680resized

IMG_1681resized

IMG_1683resized

IMG_1685resized


Quote

Rear Bumper Twerkin

I’m listening to Gang Starr’s My Advice 2 You on Moment of Truth while doing some fab work. It’s a phone photo, don’t judge me!

rearbumpertwerking01


Where To Start

Where To Start 1a

First off, I never would have made it to the event without the help of my friends. This is one of the most important aspects of why I’m able to continue drifting and having fun. A borrowed trailer, a borrowed truck and hours of work from people who just like to have fun.

Where To Start 2a

Do I want a diesel truck with enclosed trailer to make it easier? Hells yeah! But the more I re-evaluate and think, it’s not necessary. All the prep I’ve been doing lately to get ready for SEMA has almost overshadowed the fact that I will continue to do this regardless of whether or not I have sponsors.

where to start 3a

To me this is fun. It looks cool, feels good and introduces me to amazing people all over the country. Competitions may be in the future but this phase of not caring about roll center and proper geometry is what defines a style. There is no arguing with proper dynamics, although I will try haha!

where to start 4a

The first vinyl graphic I applied from an entrepreneur in Medford, OR. It’s always inspirational to hear other people’s stories about coming from the bottom, “now we here!” These are the people that help me to stay on my mission, to keep believing that there is some reason behind why I am so fortunate to be able to do what I love.

where to start 5a

I love seeing the hustle from other people over a thousand miles away, working crazy hours, jamming out to some good music and wrenching on cars. This is universal, the appreciation for automobiles and the ability to wheel them like some people only dream about. This is what keeps me going some nights, knowing there is someone who is trying to do it better and bring their own style to the forefront.

where to start 6a

Then there’s the driving. Yes Lord!! It doesn’t get too much better than the first time you touch the track surface, mash that throttle to the floor and put to the test all that you have done for the past year. Everything from the driver’s meeting to the ride alongs and talking to fans, it’s a surreal experience. This is only heightened by the fact that I get to talk to people on Facebook and then finally meet them. The camaraderie amongst our scene is one of the biggest draws for me, much more than road racing or autocrossing like I’ve done.

where to start 7a

There is always a collection of people willing to help out with knowledge, busted knuckles, loaning volt meters and even offering rides to the local parts store, all in a effort to help you destroy some tires.

where to start 9a

Then there’s the style. I love being able to see first hand what others are doing, why they do it and how they throw down on track. We come from all over to clown on each others style, hype them up and interject our own opinions. Sometimes I just sit back and watch how people communicate, it becomes easy to see how much people care about drifting and cars in general. There is soo much outside my scope that I can’t wait to discover.

where to start 10a

To me it’s not always about the pretty. I like to see what goes on in the trenches, the real work that goes on behind the flashy front. The banged up cars, dollars spent and effort put forth to put on a show sets so many apart from the crowd. I guess it’s my technical background that likes to look deeper. In fact, I can’t wait to get back to doing some editorial pieces on really cool cars. I have emerged from my fabrication cave and it’s time to start showing you all how I see things.

where to start 11a

Then there’s the challenge of next year! I couldn’t imagine not going back after the warm welcome (literally, it was hot!). The cool people, relaxed atmosphere and technical track all make for a strong magnetism that I can’t deny myself. Next time I will do it better, louder, lower and flashier!

where to start 12a

And just like everything, there is an end. I know eventually this car will wither away into nothingness. There may be nothing but a couple bytes of information that chronicle what happened. But damn, this is fun!

where to start 13a

where to start 14a


The Beginning

As I ride in the passenger seat of a friends truck, I can’t help but to reminisce on the journey thus far. To me this isn’t years in the making but decades. I would like to give my most sincere thanks to my family and friends that have helped me on numerous occasions, to lengths indescribable.

This is when the fun begins!!

20130606-161725.jpg


Picture For Now

There’s a lot that’s been happening, so much in fact that I’ve really been slacking with the blog.  In due time, for now, picture….

 

no tape instant g001


Holy Shit He’s Alive!

That was a long break huh? Winter testing for Toyota is a travel frenzy it seems. Baudette, MN and Sault Saint Marie, MI can be some very interesting places if you ever get to go. A different way of life is all. Anyway, I decided to tackle the job of making brackets for the e-brake tabs in the rear of the car.

02_9_2012_003

After getting that taken care of I made a new throttle cable bracket to take up the slack that I had at the pedal the last time I drove.

02_9_2012_004

I finally have the fuel cell in the car temporarily. I just want to get this thing running for a quick drive and systems check. Once everything is operating properly I’m going to get the real fuel cell and finish with sheet metal work.

02_9_2012_002L

Tire shredding will commence shortly.

02_9_2012_001L


Closer Still

Made some strut tops, cut out some templates to start closing off the rear firewall and bent some tube to help brace the rear structure and create a more stable area for the rear struts.




Step Back

I found today after moving forward that I have to go back. In order to design the rear cage section and mock it up I need the rest of the cage completely in the car. SO, I cut all the tacks I had in place and started finish welding everything forward of the roll hoop. I should be back to the truck conversion/rear section this weekend.


Back To Business!

Gone for two weeks of business trips in the midwest and a weekend with the family, I came home and went HAM!

I decided that as a practice car, the Fleur De Lis really doesn’t have to conform to any specific rule book as it will never see professional competition. As long as I can go a foot deep into a wall and only damage tail lights and easy body repairs I’m happy.

The fuel cell will be located right after the rear firewall which should also help some with weight distribution. Don’t know where to put the nitrous bottle yet though…

A couple more bars and a lot more cutting and this bad boy will be ready to touch the ground again!!! Smash Brothers Unite!


Good Saturday!

Got an early start today and accomplished enough to make myself happy.  That damn tubing notcher from Harbor Freight is designed to wear out quickly I swear.  I can already tell I’m gonna have to make one myself with ball bearings and such.  Brass bushings just dont cut it when trying to burn through DOM tubing.  Anyway, I fixed that shit….

So the thing is made for a 1/2 inch arbor and comes with an adapter to go to 5/8. I’ve gone through two adapters now as I went back and bought another kit. When the second one fractured I just said screw it and got busy…

That’ll teach her to break on me!!

Anyway, after overcoming that little obstacle I got the passenger side door bars done, the harness bar done and the diagonal brace. Tomorrow is the driver side and I may start cutting into the rear for the truck conversion. I still have to figure out how I want to brace everything back there before it get’s too flimsy.


More Bars

Finally got around to cutting some more bars for the cage.  I’m finding lately I don’t even touch this thing during the week and try to get as much done as possible on the weekends.  Some of the other aspects of this business are starting to pick up.  Thank you to anyone who has come to visit my site thus far.  This kind of started as a journal I could look back on when I’m older but it may turn into something far greater, hopefully.  Anyway, pictures!

 


Cage Work

Front down tubes that go over the door and down by the a-pillar…

Boxes getting tacked in so I can trim the bars to size…


Mint Green Two Tone

She still exist, patiently waiting her turn to reach a level of glory she has yet to know.


Drift Prep

Massive tire rubbing, runs like crap, but I bet you it slides like hell tomorrow.


Lesson Learned

It’s okay to fail as long as there is a lesson learned. Last time I learned the importance of practice material and understanding how a radius adds to length. This time I learned that I should use the tools available to me. I forgot I had a digital angle meter. The meter is very useful when calculating angles of B-pillars and uprights to horizontal bars. Finished product has been deemed acceptable for crashing!


Doh!

Lesson learned = Less bender, more measuring tape. Mr first attempt at the roll bar ended up two inches too long on the horizontal section.



Current State Of Things

Happy is the feeling as I start the roll cage. Things have been slow since the return from Japan, jetlag is no joke! This will be my first go so I’m moving a little slow because of the cost of DOM right now.




Much Needed Progress

Well, I finally have the chassis dolly completed. I’ve already noted a few things that will be changed if I make another one in the future but this one will serve it’s purpose well. There’s one more caster to add to the front bar and then she will be truly complete. The weight is distributed pretty well as I was able to get in the car and rock it side to side with no movement. The most surprising thing so far is how much space it actually frees up. Being able to move it around the shop makes it much easier to get my Datsun inside. Anyway, pics! Thanks for the lens Dave, I feel like I need a 50mm 1.8 now!




There’s so much more space for activities!!


Chassis Dolly 50%

I figured that cutting out a bunch of material on the car would weaken the chassis enough that the subframes could shift. This would be bad so I decided to make a dolly that would locate the subframes in all axis and still keep the car mobile. Wait ’til you see the casters!


Low Car is Low

Raising the car is never an option.  It doesn’t look good and that’s about the only reason you need.  When your low profile jack can’t even make it under the car, you only have a few options.  You can do the wood plank dance or what I’ve done here, unless you’re ballin out of control and buy air jacks.


Drifting Has Happened!!

Two weeks later, after a work trip in Ohio, I get around to this.  Made it to the track with time to spare, drove the entire time, no over heating, nothing broke, went off track multiple times and didn’t break the kit (needs lower) and made it home safely by 3am.  The clutch sucks, I’m down on power (obviously), wheels rub in the fender wells and the e-brake is almost useless.  At least I have a plan to fix things, when’s the next event?